- Front safety belts chevy trax 2015 manuals#
- Front safety belts chevy trax 2015 install#
- Front safety belts chevy trax 2015 manual#
The LATCH system may make car seat installation easier, but remember whether it's by LATCH or by seat belt, any properly installed child safety seat can save lives.įor more good advice on kids and cars, look for a certified car seat technician in your area. And never fasten more than one safety seat to the same anchor. Always make sure you are attaching to the LATCH anchors, not part of the vehicle trim or other vehicle tie-downs. You should not be able to move it more than an inch, side to side or forward. Check to see if the seat is tight in the car. If you are using a child safety seat in the forward-facing position, attach the safety seat's top tether strap to the top anchor in your vehicle. You may need to use your upper body's weight to press down the seat as you attach the lower attachment hooks for a tight fit. Tighten and adjust according to the instructions in your manual.
Front safety belts chevy trax 2015 manuals#
Of course, you should always check your vehicle and car seat manuals for specific details, but here's some general guidelines for using LATCH:įirst, fasten the safety seat's lower attachment to your vehicle's lower anchors.
Front safety belts chevy trax 2015 install#
With LATCH, you install your child safety seat without using your vehicle seat belt. LATCH may make it easier to get the child seat in right the first time and every time.
Forward-facing child seats use both a top tether and lower attachment hooks. Some convertible seats available in the United States use a top tether when rear-facing. When installing this seat in a rear-facing position, usually you use only the lower attachment hooks. convertible child safety seats have both a top tether and lower attachments. If your rear-facing infant seat has a detachable base, only the base will have a set of lower attachments. Infant car seats have lower attachments only. Top tethers greatly reduce the amount of head movement a forward-facing child may experience in a crash. The top tether attaches to an anchor in the vehicle. Top tether anchors for forward-facing safety seats can be found in different areas of your car such as the floor, underneath the vehicle seat or the rear-window shelf. Lower anchors are small horizontal bars that are found in the rear seat of the car where the seat back and bottom seat cushions meet. Forward-facing safety seats will also have one top tether strap that connects to the tether anchor in the vehicle. LATCH-equipped child safety seats will have two LATCH attachments that connect to the lower anchors. Convertible cars are not required to have tether anchors. LATCH-equipped vehicles will have two lower anchors and one top tether anchor installed in each LATCH seating position. You can also look for the built-in latch anchors which are usually marked by a symbol or tag on the vehicle's seat.
Front safety belts chevy trax 2015 manual#
Your vehicle owner's manual will tell you if LATCH is present. Any car made after September 2002 must come with LATCH in at least two seating positions. Most belt-positioning booster seats do not need to be attached to the vehicle so they do not come equipped with LATCH. LATCH is used for both rear- and forward-facing child safety seats. Simply put, it works by using a built-in strap with hooks on the child's safety seat which attach to anchors in the car. That's why a different system was developed for installing child safety seats without the use of seat belts. Between the different types of cars and child safety seats, there are literally hundreds of different ways to install a child seat. Three out of 4 car seats are not installed correctly. Narrator: Of all the frightening statistics we hear about child passenger safety, this may be the scariest.
0 kommentar(er)
